Altitude Converter
Convert altitudes between feet, metres and flight levels, with the standard-atmosphere temperature and pressure at that height. Turn a pressure into a pressure altitude, and an altimeter reading on any setting into pressure altitude.
How to Use
- In Convert, type an altitude and pick feet, metres or FL (a flight level such as 350 or FL350).
- Read the other units, the flight level and the standard (ISA) temperature and pressure at that height; the table under the drawing adds density and the speed of sound.
- Choose Pressure to altitude to find the standard altitude of a pressure in hPa, inHg or kPa, such as the 500 hPa level.
- Choose Altimeter setting to turn an altimeter reading on a local setting into pressure altitude, or a pressure altitude into what the altimeter will show.
- Check Show Work for each step, including the PHAK’s 1,000 ft per inch quick rule next to the exact figure.
Worked Example
FL350 in metres and standard conditions. FL350 is a pressure altitude of 350 × 100 = 35,000 ft, and 35,000 × 0.3048 = 10,668 m. It is below the 36,089 ft tropopause, so the standard temperature is 15 − 1.9812 × 35 = −54.3 °C and the pressure 1013.25 × (1 − 35,000 ÷ 145,442)5.2559 = 238.42 hPa (7.04 inHg).
Pressure altitude from the altimeter. With 29.42 inHg (996.28 hPa) set, the altimeter reads 5,500 ft. The standard scale shifts by (996.28 ÷ 1013.25)0.190263 = 0.996791, so the pressure altitude is 145,442 − (145,442 − 5,500) × 0.996790 = 5,949 ft. The PHAK quick rule, 5,500 + (29.92 − 29.42) × 1,000, gives 6,000 ft.
The common mistake: treating a flight level as height above the ground. FL350 is not 35,000 ft above the terrain, or even above sea level: it is where the pressure is 238.42 hPa, wherever that happens to be on the day. The PHAK puts it this way: flying from a high to a low pressure area without resetting the altimeter leaves the aircraft lower than indicated (“going from a high to a low, look out below”), by about 1,000 ft for every inch of mercury.
Show Work
Formulas
The Standard Atmosphere Behind the Altimeter
An altimeter is a barometer marked in feet. The scale is drawn from a standard atmosphere, and the FAA’s Aviation Weather Handbook lists its key figures: 1013.25 hPa (29.92 inHg) and 15 °C at sea level, a lapse rate of 6.5 °C per 1,000 m, and a tropopause at 11,000 m (36,089 ft) at −56.5 °C. The International Civil Aviation Organization adopted it as a worldwide standard, which is why the same altimeter scale works in every country.
The figures are older than ICAO. The 15 °C sea-level temperature was adopted by the International Commission for Air Navigation in 1924, and the earliest aeronautical standard atmospheres go back to Toussaint in 1919 and the first U.S. Standard Atmosphere of 1925. The sea-level pressure of 101,325 Pa was adopted in 1947. The U.S. Standard Atmosphere, 1976, used here, kept those values and agrees with the ICAO standard atmosphere up to 32 km.
The foot used in aviation is the international foot, exactly 0.3048 m, and the inch of mercury on American altimeters is the conventional one, 3,386.389 Pa, as listed by the U.S. National Institute of Standards and Technology.
About This Converter
This converter changes altitudes between feet, metres and flight levels and gives the standard temperature, pressure, density and speed of sound at that height from the U.S. Standard Atmosphere, 1976 (the ICAO standard atmosphere), from 2,000 ft below sea level to 150,000 ft. It also finds the standard altitude of any pressure, and converts between indicated and pressure altitude for an altimeter setting in inHg or hPa, with the quick rules from the PHAK and the Bureau of Meteorology shown beside the exact figures.
All the altitudes here are standard-atmosphere (pressure) altitudes. True height above sea level also depends on the day’s temperature, which the altimeter cannot see: the PHAK warns that colder-than-standard air puts the aircraft lower than the altimeter shows. Everything is worked out in your browser.
Related tools: Density Altitude Calculator, Airspeed Calculator and the Unit Converter.
For planning and training only — always use your aircraft’s POH/AFM and official weather and charts.
Frequently Asked Questions
How do I convert feet to metres?
Multiply by 0.3048, which is exact: the international foot is defined as 0.3048 m. 10,000 ft is 3,048 m, and going the other way 3,000 m ÷ 0.3048 is 9,842.52 ft.
What is a flight level?
A flight level is pressure altitude in hundreds of feet, read with the altimeter on the standard setting of 29.92 inHg (1013.25 hPa). FL350 is 35,000 ft pressure altitude, or 10,668 m. In the United States flight levels start at FL180; below 18,000 ft altitudes are flown on the local altimeter setting.
What are the standard temperature and pressure at altitude?
The standard atmosphere starts at 15 °C and 1013.25 hPa at sea level and cools 6.5 °C per kilometre (1.98 °C per 1,000 ft) up to 36,089 ft, where it stays at −56.5 °C. At 10,000 ft that gives −4.8 °C and 696.82 hPa; at FL350, −54.3 °C and 238.42 hPa.
At what altitude is the pressure 500 hPa?
In the standard atmosphere 500 hPa, about half the sea-level pressure, is at 18,289 ft (5,574 m), where the standard temperature is −21.2 °C. On a real day the height of the 500 hPa level moves with the temperature of the air below it.
How does the altimeter setting change the altitude shown?
The FAA’s rule is about 1,000 ft per inch of mercury: the PHAK’s example of flying from a 29.94 to a 29.69 inHg area without resetting puts the aircraft about 0.25 × 1,000 = 250 ft lower than indicated. Exactly, 5,500 ft indicated with 29.42 inHg set is a pressure altitude of 5,949 ft; the quick rule gives 6,000 ft.
How do I use the Altitude Converter?
Simply type or paste your value and read the result, which refreshes the instant you change something. There is nothing to submit and nothing to wait for.
Is it free? Does it work without internet?
Yes to both. It is free with no sign-up, and once the page has loaded it keeps working even with no internet.
Where does my data go?
Nowhere — every calculation runs on your own device. Nothing you enter is uploaded, logged, or stored.
Common Use Cases
Metric charts and clearances
A 3,000 m altitude is 9,842.52 ft; at 10,000 ft the metric figure is 3,048 m.
Airliner cruise
At FL350 (10,668 m) the standard atmosphere is −54.3 °C at 238.42 hPa, 31.0 % of sea-level density.
Weather charts by pressure
The 500 hPa level sits at 18,289 ft in the standard atmosphere and 300 hPa at 30,065 ft.
Performance planning
With 29.42 inHg set, 5,500 ft on the altimeter is a pressure altitude of 5,949 ft for the performance charts.
High-pressure days
With QNH 1030 hPa set, a pressure altitude of 3,000 ft shows 3,444 ft on the altimeter.
Last updated: