Body Fat Calculator
Estimate body fat percentage from a tape measure with the US Navy circumference method, split your weight into fat and lean mass, and compare with a BMI-based estimate. Works in centimetres or inches.
How to Use
- Pick US Navy tape (the default) or BMI-based estimate, then choose man or woman: the formulas differ.
- Enter your height and weight, and your age if you want the BMI-based comparison (adults, 18 and over).
- Measure your neck just below the Adam’s apple. Men measure the abdomen at the navel; women measure the waist at its narrowest point and the hips at the widest part of the buttocks.
- Pick cm or in beside each tape measurement. Centimetres are converted to inches before the formula, so either unit gives the same answer.
- Read your body-fat percentage, fat mass, lean mass and ACE category; the chart shows both estimates on the ACE scale.
- Press a preset for an example, and see Show Work for the conversions, logarithms and each step.
Worked Example
A man, in centimetres. Height 178 cm, neck 38 cm, abdomen 86 cm, weight 80 kg. In inches that is 70.08, 14.96 and 33.86, so abdomen − neck = 18.90 in. Then %BF = 86.010 × log₁₀(18.90) − 70.041 × log₁₀(70.08) + 36.76 = 86.010 × 1.27641 − 70.041 × 1.84559 + 36.76 = 17.28%. Fat mass is 80 × 0.1728 = 13.8 kg and lean mass 66.2 kg: the ACE fitness range for men.
A woman. Height 165 cm, neck 32 cm, waist 72 cm, hips 96 cm: waist + hip − neck = 53.54 in and height 64.96 in. %BF = 163.205 × log₁₀(53.54) − 97.684 × log₁₀(64.96) − 78.387 = 26.68%, ACE average. At 60 kg that is 16.0 kg of fat and 44.0 kg lean.
The common mistake: putting centimetres into the inch formula. The constants 36.76 and −78.387 only work with inches. Using 48 cm (86 − 38) and 178 cm directly gives 86.010 × log₁₀(48) − 70.041 × log₁₀(178) + 36.76 = 23.74% instead of 17.28%; for the woman above it gives 53.20% instead of 26.68%. Convert to inches first, or use the centimetre constants (+30.295 for men, −104.912 for women).
Show Work
Formulas
From the Navy Laboratory to the Tape Measure
J. A. Hodgdon and M. B. Beckett of the Naval Health Research Center in San Diego published the circumference equations in 1984, in two reports, one for men and one for women. They compared tape measurements with body density measured by underwater weighing in Navy personnel and found that height plus a few girths at the neck, abdomen and hips predicted it well enough to use in the field, where a tape measure is all you have.
Underwater weighing gives density, and Siri’s 1961 equation (%BF = 495 ÷ density − 450) turns that into percent fat. The US military uses the method as a direct percent-fat equation in inches, and the Army printed it in AR 600-9, with worked samples, as its multi-site tape test.
Paul Deurenberg, Jan Weststrate and Jaap Seidell published the BMI-based formula in the British Journal of Nutrition in 1991, from underwater-weighing data on Dutch adults and children; the adult version is used here. The categories come from the American Council on Exercise’s table of general body-fat percentage categories.
About This Tool
This calculator uses the US Navy circumference equations in the exact inch form the US military prints, converting centimetres to inches first, so either unit gives the same result. It splits your weight into fat and lean mass, places the result on the ACE categories (labelled as ACE’s), and, when you give your age, compares it with the Deurenberg BMI-based estimate so you can see when the two disagree. Height takes feet and inches typed as 5'10, and weight takes kilograms, pounds or stone.
Every body-fat formula is an estimate fitted to a group of people; tape measurements vary by a centimetre or two between tries, so measure three times and use the average. For general information only — not medical advice. Talk to a doctor or other qualified professional about your own health.
Everything runs in your browser; nothing you enter is sent anywhere.
Related tools: Lean Body Mass & FFMI Calculator, Army Body Fat Calculator, and Ideal Weight Calculator.
Frequently Asked Questions
How does the US Navy tape method work?
It estimates body fat from height and a few tape measurements. For men, %BF = 86.010 × log₁₀(abdomen − neck) − 70.041 × log₁₀(height) + 36.76, with everything in inches. A 178 cm man with a 38 cm neck and an 86 cm abdomen has 33.86 − 14.96 = 18.90 in, giving 17.28%. Women use waist + hip − neck and their own constants.
Can I use centimetres in the Navy formula?
Only if you convert or change the constant. The published formula expects inches; feeding it centimetres gives 23.74% for the man above instead of 17.28%. The calculator converts for you. Written for centimetres, the constant becomes +30.295 for men and −104.912 for women, with the same multipliers.
Why might another Navy calculator give a slightly different number?
Some use Hodgdon and Beckett’s original body-density equations with Siri’s formula (%BF = 495 ÷ density − 450) instead of the percent-fat form the US military prints. For the 178 cm man the density version gives 17.20% instead of 17.28%; the two usually agree within a few tenths of a point.
What do the ACE body-fat categories mean?
The American Council on Exercise groups body fat as: essential fat 2–5% (men) and 10–13% (women), athletes 6–13% and 14–20%, fitness 14–17% and 21–24%, average 18–24% and 25–31%, and obese 25% and up for men and 32% and up for women. 17.3% puts a man in the fitness group.
Why do the tape and BMI-based estimates disagree?
The BMI-based Deurenberg formula only knows height, weight, age and sex, so it reads muscle as fat. A muscular 30-year-old man, 180 cm and 95 kg with a 42 cm neck and an 84 cm waist, is 11.9% by tape but 25.9% from his BMI of 29.32. For an average build they are close: a 30-year-old woman at 165 cm and 60 kg is 26.7% by tape and 27.9% by BMI.
How do I use the Body Fat Calculator?
Just type your numbers. The answer shows up right away — there is no button to press. Change anything and it updates by itself.
Is it free? Does it work without internet?
Yes to both. It is free with no sign-up, and once the page has loaded it keeps working even with no internet.
Where does my data go?
Nowhere — every calculation runs on your own device. Nothing you enter is uploaded, logged, or stored.
Common Use Cases
Tracking a diet
A man at 80 kg and 17.3% body fat carries 13.8 kg of fat and 66.2 kg of lean mass; re-measuring shows whether lost weight came from the fat side.
US units
At 5 ft 10 in and 180 lb with a 15.5 in neck and a 34 in abdomen, a man is 16.5% body fat: 29.7 lb of fat and 150.3 lb lean.
Women’s measurements
A woman, 165 cm and 60 kg, with a 32 cm neck, 72 cm waist and 96 cm hips is 26.7%: 16.0 kg fat, 44.0 kg lean, ACE average.
Comparing methods
A 45-year-old woman at 168 cm and 75 kg (waist 85 cm, hips 108 cm, neck 34 cm) gets 37.0% by tape and 36.8% by BMI, so both methods agree she is in the ACE obese range.
Before a military tape test
The same inch formulas are the US military’s multi-site tape method; the Army now uses its own one-site and waist-to-height standards, in the Army Body Fat Calculator.
Last updated: