Red-Eye Removal
Click each red eye and only the flash-red pixels inside the brush are fixed: their red is replaced by the average of green and blue, so the pupil turns a natural dark grey and the skin and iris are left alone.
How to Use
- Drop the photo on the box, click to browse, or paste it. A sample portrait with two red eyes is shown, already fixed, until you do.
- Set the Brush so the circle that follows the pointer is a little larger than the red pupil.
- Click on each red pupil. Only pixels that pass the redness test are changed, so a slightly too large brush does no harm to the skin or iris.
- If some red remains, lower Tolerance; if anything else changes, raise it. Darken makes the fixed pupil deeper. Every setting is re-applied to all your clicks at once.
- Use Undo click or Clear to start over, hold Compare to see the original, then save in any format. Show Work lists the pixels changed by your last click.
The circle is the brush. Click on each red pupil; dashed rings mark the eyes you have fixed.
Worked Example
A flash pupil pixel (196, 52, 46) with Standard settings (Tolerance 2.0, Darken 20%). The larger of green and blue is 52, and 196 ÷ 52 = 3.77, well over 2.0, so it is red-eye. Red becomes (52 + 46) ÷ 2 = 49, giving (49, 52, 46), and darkening by 20% gives (39, 42, 37): a natural near-black pupil.
Pixels that are left alone. Skin at the edge of the brush, (232, 178, 150), scores 232 ÷ 178 = 1.30; a brown iris (110, 70, 40) scores 1.57. Both are under 2.0 and keep their colour. A pinkish red-eye such as (220, 120, 120) only scores 1.83, so it needs the Faint or pink preset (1.5).
The common mistake: a rule that only compares differences. Testing "red more than 40 above green and blue" also catches skin: 232 is 54 above 178 and 82 above 150, so skin inside the brush would lose its red and turn grey-green. Comparing ratios avoids that, because skin is never twice as red as it is green.
Show Work
Formulas
Why Flash Makes Eyes Red
The back of the eye is lined by the choroid, a layer full of blood vessels. When a flash fires right next to the lens, its light passes through the pupil, lights up that red layer and bounces almost straight back into the camera. The effect is strongest in dim rooms, where pupils are wide open, and with compact cameras and phones, whose flash sits very close to the lens. Moving the flash away from the lens, or bouncing it off a ceiling, stops the reflected light from reaching the lens.
The "red-eye reduction" setting on many cameras fires a short burst of light before the real flash so the pupils shrink first. A related effect is worth knowing about: if one eye in a flash photo glows white or yellow instead of red, it can be a sign of an eye condition, and eye doctors advise getting it checked, especially in young children. That is not something to edit away without a second look.
About This Tool
This tool fixes red-eye where you click, using a ratio test that separates flash-red pupils from skin and brown irises, and a fix that keeps the pupil’s natural shading. Every click is stored, so changing the brush, tolerance or darkness re-applies all of them, and Show Work lists the real values of the pixels your last click changed.
Photos are decoded and saved in your browser by the engine behind the Universal Image Converter, so HEIC, TIFF and RAW files work too. The fix is made at full resolution. Nothing is uploaded.
Related tools: Image Adjustments, Color Replace, and Image Cropper.
Frequently Asked Questions
How does it decide which pixels are red-eye?
Inside the brush, a pixel counts as red-eye when its red value is at least Tolerance times the larger of its green and blue values, and at least 40. At the default 2.0 a flash pupil like (196, 52, 46) passes easily (3.8×), while skin (232, 178, 150) at 1.3× and a brown iris (110, 70, 40) at 1.6× are left alone.
What does the fix do to a pixel?
It replaces the red value with the average of green and blue, which removes the red cast but keeps the pupil’s own light and shade, including the white catchlight. Then all three values are multiplied by (1 − Darken). With Darken 20%, (196, 52, 46) becomes (49, 52, 46) and then (39, 42, 37).
What causes red-eye?
Light from a flash close to the lens goes through the pupil, reflects off the blood-rich back of the eye and comes straight back into the camera. It is worst in dim light, when pupils are wide open, and with small cameras and phones where the flash sits right next to the lens.
Why are my pet’s eyes green or yellow instead of red?
Many animals, including cats and dogs, have a reflective layer behind the retina called the tapetum lucidum that helps them see in the dark. It reflects flash light as green, yellow or blue eye-shine, which this tool deliberately does not touch, because it only fixes red. Fix pet eye-shine with a dark brush in a paint program.
Is my photo uploaded?
No. The photo is decoded, fixed and saved in your browser by the same engine as the Universal Image Converter, so HEIC, TIFF and RAW files work too. Nothing leaves your device, which matters for family photos.
How do I use the Red-Eye Removal?
Simply type your numbers and read the result, which refreshes the instant you change something. There is nothing to submit and nothing to wait for.
Is it free? Does it work without internet?
Yes to both. It is free with no sign-up, and once the page has loaded it keeps working even with no internet.
Where does my data go?
Nowhere — every calculation runs on your own device. Nothing you enter is uploaded, logged, or stored.
Common Use Cases
Party and holiday snaps
Fix both eyes of each person in a 4000×3000 indoor flash photo in a few clicks, with a brush about 1% of the width.
Scanned prints
Old compact-camera prints often show strong red-eye; scan at 600 dpi and fix each pupil before sharing.
Group photos
Use a small 0.6% brush for the tiny pupils in a group shot of 10–20 people.
Close-up portraits
A large 3% brush and Darken 30% give a natural, deep pupil on a tight headshot.
Last updated: