Resistor Calculator
Add resistors in series or parallel with the worst-case tolerance range, or find the nearest standard E-series value and the best two-resistor pair for any target resistance.
How to Use
- Choose Series / Parallel to combine resistors, or Find Standard Value to hit a target.
- Combine: type the values separated by commas, such as
1k, 2.2k, 4.7k. Prefixes k and M and the 4k7 / 470R style all work. - Pick the tolerance of the parts to see the worst-case range of each total.
- Find: enter the target resistance and the E-series you can buy (E24 for ±5% parts, E96 for ±1%).
- Read the nearest single value, the best series pair and the best parallel pair; the closest one is highlighted, and Show Work lists every step.
Reading the coloured bands on a resistor? Use the Resistor Color Code tool.
Worked Example
Three resistors: 1 kΩ, 2.2 kΩ and 4.7 kΩ.
In series: R = 1,000 + 2,200 + 4,700 = 7,900 Ω = 7.9 kΩ.
In parallel: 1/R = 1/1,000 + 1/2,200 + 1/4,700 = 0.0016673 S, so R = 1 / 0.0016673 = 599.8 Ω.
With ±5% parts the series total can be anywhere from 7.505 to 8.295 kΩ.
Making 25 kΩ from E24 parts. The nearest single value is 24 kΩ (−4%). 24 kΩ + 1 kΩ in series is exactly 25 kΩ, and so is 30 kΩ in parallel with 150 kΩ: 30,000 × 150,000 / 180,000 = 25,000 Ω.
The common mistake: stopping at the sum of reciprocals. For 1 kΩ in parallel with 2.2 kΩ, 1/1,000 + 1/2,200 = 0.0014545. That is the total conductance in siemens, not the resistance. Its reciprocal, 687.5 Ω, is the answer, and it is below the smaller resistor, as every parallel total must be.
Show Work
Formulas
How the Standard E-Series Values Are Chosen
Resistors are not made in every value. They come in the preferred-number series of IEC 60063: E6, E12, E24, E48, E96 and E192, named after the number of values in each decade. The values are spaced geometrically, so each one is about the same percentage above the last: in E12 the step is close to 101/12 ≈ 1.21, or about 21%. That spacing matches the tolerance the series is meant for, so ±10% E12 parts between them cover the whole range with little gap.
The three-digit series follow the rounding rule closely: every E192 value is 100 × 10i/192 rounded to three digits, except 919, which the standard lists as 920. E96 is every second E192 value and E48 every fourth. The older two-digit E24 series does not follow the rule exactly: pure rounding would give 2.6, 2.9, 3.2, 3.5, 3.8, 4.2, 4.6 and 8.3, where the standard has 2.7, 3.0, 3.3, 3.6, 3.9, 4.3, 4.7 and 8.2.
Because the values are spread by percentage, a target that falls midway between two of them is several percent from either: 1.4 kΩ is 7.1% from both 1.3 kΩ and 1.5 kΩ in E24, and 13.5 kΩ is 11.1% from 12 kΩ and 15 kΩ in E12. Two parts in series or parallel almost always get far closer, which is why this calculator searches every pair in the chosen series.
About This Calculator
This calculator does two jobs. Series / Parallel adds up to 50 resistors both ways and shows the worst-case range for the tolerance you choose. Find Standard Value takes a target and an E-series and returns the nearest single part, the best series pair and the best parallel pair, found by checking every standard value from 1 Ω to 10 MΩ, not by rounding.
Values can be typed the way they are printed on schematics: 4.7k, 4k7, 470R, 1M or 2.2 kΩ (lower-case m means milliohms). All calculations run in your browser; nothing you enter is sent to a server. The Show Work section lists every step with your numbers.
It is meant for hobbyists, students and engineers picking real parts. To read the bands on a part you already have, use the color code tool; the Find mode also shows the bands of the nearest standard value.
Related calculators: Resistor Color Code, Voltage Divider, and LED Resistor Calculator.
Frequently Asked Questions
How do I calculate resistors in parallel?
Add the reciprocals and take the reciprocal of the sum: 1/R = 1/R1 + 1/R2 + … For two resistors this is the same as product over sum, R1 × R2 / (R1 + R2). 1 kΩ in parallel with 2.2 kΩ is 2,200,000 / 3,200 = 687.5 Ω.
Why is the parallel resistance lower than the smallest resistor?
Each resistor in parallel adds another path for the current, so their conductances (1/R) add up and the total resistance falls. Two equal resistors give half the value: 10 kΩ in parallel with 10 kΩ is 5 kΩ, not 20 kΩ.
What are E12, E24 and E96 resistor values?
They are the preferred-number series of IEC 60063: 12, 24 or 96 values in every decade, spaced so that each step is about the same percentage. E12 goes with ±10% parts, E24 with ±5% and E96 with ±1%. E24 starts 1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.8, 2.0, 2.2 … and repeats ×10 in each decade.
How do I make a non-standard resistance from two resistors?
Use the Find Standard Value mode. A series pair is a large value plus a small trim (25 kΩ = 24 kΩ + 1 kΩ). A parallel pair is a value just above the target plus a large one that pulls it down (30 kΩ in parallel with 150 kΩ is also exactly 25 kΩ).
Does tolerance add up when resistors are in series?
In the worst case every part is off by the same percentage in the same direction, so the total has the same percentage tolerance: three 1 kΩ ±5% resistors give 2.85 to 3.15 kΩ. Random errors partly cancel, so a real combination is usually closer to nominal than the worst case.
How do I use the Resistor Calculator?
Simply type your numbers and read the result, which refreshes the instant you change something. There is nothing to submit and nothing to wait for.
Does it cost anything or need an account?
No. The tool is completely free, there is no account to create, and it keeps working offline after the page first loads.
Is anything I type uploaded?
No. The tool works entirely on your device, so the values you enter never leave your browser.
Common Use Cases
LED Current Resistor
A 9 V supply, a 2 V red LED and 20 mA need 350 Ω, which E12 does not have. 330 Ω is −5.7%; 390 Ω in parallel with 3.3 kΩ gives 348.8 Ω, only −0.35%.
Regulator Feedback Divider
An LM317 at 9 V with R1 = 240 Ω needs R2 = 240 × (9 / 1.25 − 1) = 1,488 Ω. In E24, 1.5 kΩ is +0.81%; 1.5 kΩ in parallel with 180 kΩ is 1,487.6 Ω (−0.03%).
Parts-Bin Substitutes
No 5 kΩ in the drawer? Two 10 kΩ in parallel make exactly 5 kΩ, and two 2.2 kΩ in series make 4.4 kΩ.
Spreading the Heat
Four 100 Ω ¼ W resistors in parallel give 25 Ω. Equal resistors share the current equally, so the group can dissipate 4 × 0.25 = 1 W.
Last updated: