Vignette Effect
Darken, lighten or tint the edges of a photo with a smooth radial vignette. Set where the fade starts and ends, its strength and colour, and click the preview to move the centre.
How to Use
- Drop a photo on the box, click to browse, or paste one. A sample photo is shown until you do, so you can try the presets first.
- Pick a colour (black darkens the edges, white gives a soft high-key look) and set Strength, the most the edge pixels are blended toward that colour.
- Set Inner, where the fade starts, and Outer, where it reaches full strength. Both are percentages of the distance from the centre to a corner.
- Choose Circle for a round falloff like a real lens, or Fit to frame for an oval that darkens all four edges equally. Click or drag on the preview to move the centre onto your subject.
- Save in any format from the Save panel. Show Work gives the exact before and after values of sample pixels from your own image.
Click or drag on the picture to move the centre. Dashed rings: where the fade starts and where it reaches full strength.
Worked Example
A 1200×800 photo with Classic dark (black, Strength 50%, Inner 40%, Outer 100%, Circle). The centre-to-corner distance is √(1200² + 800²) ÷ 2 = 721.1 px, so the fade starts 288.4 px from the centre and reaches full strength at 721.1 px. The top-left pixel sits 720.4 px out (d = 0.999), the curve is 1.000, and a value of 200 becomes 200 − 200 × 0.5 = 100.
Edge midpoints and the oval shape. The middle of the left edge is 599.5 px out: d = 0.831, t = (0.831 − 0.4) ÷ 0.6 = 0.719, smoothstep 0.807, so 200 becomes 119. The middle of the top edge is only 399.5 px out (d = 0.554) and falls just to 184. With Fit to frame the distance is measured on an oval, both edge midpoints give d = 0.707 and both become 148.
The common mistake: Strength 100% with black. That turns every pixel past Outer pure black (0), wiping out detail in the corners. Real lens falloff is much gentler: at 30° off-axis the cos⁴ law leaves 56% of the light, a loss of 0.83 stop, the same as a black vignette at Strength 44%.
Show Work
Formulas
Where Vignettes Come From
Every camera lens delivers less light to the corners of the frame than to the centre. Part of it is geometry, called natural vignetting: light reaching the sensor at an angle θ off the axis is reduced by roughly cos⁴ θ, so at 30° only 56% arrives. Part is mechanical: the lens barrel, a filter or a lens hood physically blocks some of the oblique rays, which is why wide-angle lenses and wide apertures show the strongest falloff.
Photographers soon used the effect on purpose. Darkened or faded edges frame the subject and steer the eye to the brightest part of the picture, and portrait studios printed through shaped masks to fade the edges out. Today raw editors usually remove the lens's own vignetting with a lens profile and then add a controlled one back, which is what this tool does: a smooth falloff you set by number rather than one fixed by the glass.
About This Tool
This tool adds a vignette pixel by pixel: it measures each pixel's distance from a centre you can move, eases the effect in with a smoothstep curve between an inner and an outer radius, and blends toward any colour you choose. Show Work lists the real before and after values of pixels from your own picture, so you can see exactly how much each part was changed.
Images are decoded and saved in your browser by the engine behind the Universal Image Converter, so TIFF, PSD, HEIC, TGA and RAW files work too. Large photos are previewed at reduced size and processed at full size when you save. Nothing is uploaded.
Related tools: Tilt-Shift Effect, Background Blur, and Image Adjustments.
Frequently Asked Questions
How is the vignette calculated?
For every pixel the tool measures its distance d from the centre as a fraction of the centre-to-corner distance. Below Inner nothing changes; above Outer the pixel gets the full Strength; in between a smoothstep curve t²(3 − 2t) eases from 0 to 1. The pixel is then blended toward the vignette colour: new = old + (colour − old) × strength × curve.
Why are the long edges darker than the short ones?
In Circle mode the falloff is round, so on a 1200×800 photo the middle of the left edge is 600 px from the centre but the middle of the top edge only 400 px. With Inner 40%, Outer 100% and Strength 50%, a value of 200 drops to 119 at the left edge but only to 184 at the top. Fit to frame uses an oval instead, and both edge midpoints come out at 148.
What do Inner and Outer mean?
Both are percentages of the distance from the centre to the corners. Inner is the radius of the untouched zone in the middle; Outer is where the effect reaches full strength. A wide gap between them gives a soft, gradual vignette; a narrow gap gives a hard ring. Outer can go past 100%, so even the corners never reach full strength.
Black or white vignette?
Black is the classic look: it darkens the edges and pulls the eye toward the middle, the way lens falloff does. White or a pale colour gives a bright, dreamy or vintage portrait look. Any colour works; a dark brown gives a sepia-toned edge.
Is my photo uploaded?
No. The photo is decoded, processed and saved in your browser by the same engine as the Universal Image Converter, so TIFF, PSD, HEIC and camera RAW files work too. Nothing leaves your device.
How do I use the Vignette Effect?
Just type your numbers. The answer shows up right away — there is no button to press. Change anything and it updates by itself.
Do I need to install or sign up for anything?
Not at all — it runs in the browser with nothing to install and no account. After it loads once, it even works without an internet connection.
Is my information private?
Yes. Everything happens in your browser. Nothing you type is sent to a server or saved anywhere.
Common Use Cases
Portraits
Darken the edges of a 4000×6000 portrait by 30–40% so the face, not the background, is the brightest part of the frame.
Product shots
A soft 25% vignette with Inner at 50% keeps a centred product untouched while the corners fall off gently.
Vintage or film look
A strong dark-brown vignette with a narrow clear zone imitates the heavy falloff of old lenses and toy cameras.
Text over photos
Darken the edges of a banner or thumbnail so white captions near the border stay readable.
Last updated: