Gear Ratio Calculator
Work out engine rpm at any road speed, or road speed at any rpm, from the axle ratio, the gear and the tyre size. Get the axle ratio from ring-and-pinion tooth counts, the ratio that restores your rpm after bigger tyres, and the speed in every gear.
How to Use
- Pick a mode: RPM at speed, Speed at RPM, Ring & pinion, Re-gear for tyres, or Every gear.
- Enter the axle (final drive) ratio and the transmission gear ratio; 1.00 is direct drive, below 1 is overdrive.
- Enter the tyre as its size (265/70R17 or 35x12.50R17) or as a diameter in inches or millimetres.
- Enter the road speed, the engine rpm, the ring and pinion tooth counts or the gearbox ratios, depending on the mode.
- Read the result and the drivetrain drawing, and see every step under Show Work.
Worked Example
Cruising rpm. A car with a 3.73 axle, a TREMEC Magnum six-speed (sixth gear 0.63) and 26 in tyres is doing 70 mph. The overall ratio is 3.73 × 0.63 = 2.350, so the engine turns 70 × 2.350 × 336.13 ÷ 26 = 2,127 rpm while the wheels turn 905 rpm.
Bigger tyres. A truck with a 3.55 axle on 265/70R17 tyres (17 + 2 × 265 × 0.70 ÷ 25.4 = 31.61 in) gets 35x12.50R17s. The 3.55 now behaves like 3.55 × 31.61 ÷ 35 = 3.21, and getting the old rpm back takes 3.55 × 35 ÷ 31.61 = 3.93; the nearest Ford 8.8 in. set is 3.90 (43:11). Until the speedometer is recalibrated, an indicated 60 mph is really 66.4 mph.
The common mistake: π twice. The 336 in rpm = mph × ratio × 336 ÷ diameter already contains π: 63,360 inches per mile ÷ 60 minutes ÷ π = 336.13. Using π × D × rpm ÷ 336 for the speed puts π in a second time and gives an answer 3.14 times too big; 3,000 rpm through a 3.73 axle on 26 in tyres is 62.2 mph, not 195 mph.
Show Work
Formulas
Gear Sets and Where the Numbers Come From
Every axle ratio is a ring-gear tooth count divided by a pinion tooth count, which is how Yukon Gear & Axle tells owners to identify an unmarked axle. The sets are sold under rounded names, and each axle family has its own list. These are the Ford 8.8 in. sets in the Motive Gear differential catalogue:
| Sold as (ratio) | Ring gear (teeth) | Pinion (teeth) | Exact ratio (ring ÷ pinion) |
|---|---|---|---|
| 3.08 | 40 | 13 | 3.077 |
| 3.27 | 36 | 11 | 3.273 |
| 3.31 | 43 | 13 | 3.308 |
| 3.55 | 39 | 11 | 3.545 |
| 3.73 | 41 | 11 | 3.727 |
| 3.90 | 43 | 11 | 3.909 |
| 4.10 | 41 | 10 | 4.100 |
| 4.56 | 41 | 9 | 4.556 |
| 4.88 | 39 | 8 | 4.875 |
| 5.14 | 36 | 7 | 5.143 |
| 5.71 | 40 | 7 | 5.714 |
| 6.14 | 43 | 7 | 6.143 |
The rpm formula is plain geometry: a tyre of diameter D inches covers π × D inches per turn, a mile is 63,360 inches and an hour 60 minutes, so wheel rpm = mph × 63,360 ÷ (60 × π × D) = mph × 336.13 ÷ D, and the engine turns faster by the overall ratio. Yukon’s RPM calculator uses the rounded 336 and TREMEC’s gear-ratio calculator divides by 0.002975 (1 ÷ 336.1); they are the same constant. The tyre diameter from a metric size is the rim diameter plus two sidewalls of width × aspect ratio, the formula in Yukon’s tyre-height calculator. Under load a tyre is a little shorter than that, so real rpm is slightly higher than the calculated figure.
Gearbox ratios in the presets are TREMEC’s published sets: the TKX five-speed 2.87, 1.89, 1.28, 1.00, 0.81, and the Magnum six-speed 2.66, 1.78, 1.30, 1.00, 0.80, 0.63. As Yukon puts it, numerically higher “short” or “deep” gears (4.88, 5.29) give more torque and quicker launches with a lower top speed; numerically lower “tall” gears (3.08, 3.73) do the opposite.
About This Calculator
Reference: Bearing Types Reference.
This calculator handles the five gearing questions people ask most: what rpm the engine turns at a speed, what speed an rpm gives, what ratio a ring and pinion make, what ratio brings the rpm back after a tyre-size change, and how fast the car goes in each gear at the shift point. Tyres can be entered as a metric size, a flotation size or a measured diameter, in inches or millimetres, and every result comes with the working.
Have a re-gear set up by someone with the axle maker’s procedure, and recalibrate the speedometer after any tyre-size change. For the background, read Understanding Gear Ratios. Everything runs in your browser and nothing you enter is sent anywhere.
Related calculators: Tire Size Calculator, Horsepower & Torque Calculator, and 0–60 mph Estimator.
Frequently Asked Questions
How do you calculate rpm from gear ratio and tyre size?
rpm = mph × axle ratio × gear ratio × 336.13 ÷ tyre diameter in inches. At 70 mph with a 3.73 axle, a 0.63 sixth gear and 26 in tyres that is 70 × 3.73 × 0.63 × 336.13 ÷ 26 = 2,127 rpm. 336.13 is the number of inches in a mile, 63,360, divided by 60 minutes and by π.
How do I work out my axle ratio from the gear teeth?
Divide the ring-gear teeth by the pinion teeth. A 41-tooth ring and an 11-tooth pinion give 41 ÷ 11 = 3.727, sold as a 3.73; 41 ÷ 10 is a 4.10 and 39 ÷ 8 = 4.875 is a 4.88 (Ford 8.8 in. sets in the Motive Gear catalogue).
What gear ratio do I need for bigger tyres?
Multiply the old axle ratio by new diameter ÷ old diameter. Going from 265/70R17 (31.6 in) to 35 in tyres on a 3.55 axle needs 3.55 × 35 ÷ 31.61 = 3.93 to get the old rpm back; the nearest Ford 8.8 in. set is a 3.90. Left alone, the 3.55 behaves like a 3.21.
How much do bigger tyres change the speedometer?
The speedometer reads low by the size change. With a speedometer set for 31.6 in tyres and 35 in tyres fitted, an indicated 60 mph is really 66.4 mph. Engine rpm at a given speed drops by the same 9.7 %.
Is a higher or lower gear ratio better?
A numerically higher ratio (4.10, 4.56) multiplies torque more, so it accelerates and tows better but turns more rpm at cruise; a lower one (3.08, 3.27) cruises at lower rpm with less pull, as Yukon Gear & Axle puts it. On 33 in tyres a 4.10 axle in direct drive turns 2,715 rpm at 65 mph.
How do I use the Gear Ratio Calculator?
Just type your numbers. The answer shows up right away — there is no button to press. Change anything and it updates by itself.
Do I need to install or sign up for anything?
Not at all — it runs in the browser with nothing to install and no account. After it loads once, it even works without an internet connection.
Is my information private?
Yes. Everything happens in your browser. Nothing you type is sent to a server or saved anywhere.
Common Use Cases
Highway rpm
A 3.73 axle with a TREMEC Magnum’s 0.63 sixth gear on 26 in tyres turns 2,127 rpm at 70 mph.
Identifying an axle
Count 41 ring-gear and 11 pinion teeth and you have a 3.727 “3.73”; on 28 in tyres in direct drive it turns 3,132 rpm at 70 mph.
Bigger tyres on a truck
35 in tyres on a 3.55 axle that came with 265/70R17s need a 3.93 to restore the rpm; the nearest Ford 8.8 in. set is 3.90.
Speed in each gear
A TREMEC TKX (2.87 to 0.81) with a 3.73 axle and 26 in tyres reaches 47.0 mph in first at 6,500 rpm and drops to 4,280 rpm in second.
Metric cars
A 3.42 axle and 0.80 top gear on 225/45R17 tyres (24.97 in) turns 2,288 rpm at 100 km/h.
Last updated: