Watermark
Add a text watermark to a photo, in a corner or tiled diagonally across it, at any opacity. Sizes scale with the picture, and one pixel of the blend is worked through with real numbers.
How to Use
- Drop an image on the box, click to browse, or paste one. TIFF, PSD, HEIC, TGA and camera RAW files open too. A built-in sample is loaded so you can try the presets straight away.
- Type the Text, for example “© 2026 Your Name” or “DRAFT”. Presets keep the text you typed.
- Choose a Position: one of nine places, or Tiled to repeat the mark across the whole picture at an angle.
- Set Size (a share of the picture’s shorter side), Opacity and colour; tick Outline so the mark shows on both light and dark areas.
- Save the watermarked picture in any format from the Save panel. Keep your unmarked original.
Worked Example
A corner credit on a 6000 × 4000 photo. At a size of 5%, the text is 4000 × 0.05 = 200 px tall, and a 3% margin keeps it 4000 × 0.03 = 120 px from the edges, so in the bottom-right position its centre line sits at y = 4000 − 120 − 100 = 3780. White at 40% opacity over a sky pixel (40, 90, 160) gives 40 + (255 − 40) × 0.4 = 126, 90 + 165 × 0.4 = 156 and 160 + 95 × 0.4 = 198: (126, 156, 198), a lighter blue that still shows the sky through the letters.
The same photo tiled. With spacing 1.5, if the text measures 900 px wide, the marks repeat every 900 + 200 × 1.5 = 1200 px along a row and every 200 × (1 + 1.5) = 500 px from row to row, with every other row shifted half a step so the marks do not line up in columns. The whole grid is then turned, −30° by default, around the middle of the picture.
The common mistake: a fixed pixel size. A 36 px mark that looks right on a 1080 px phone picture is 3.3% of its shorter side, but on the 6000 × 4000 photo it is only 0.9%, small enough to miss or crop away. Setting the size as a share of the shorter side keeps the mark in proportion on every picture.
Show Work
Formulas
From Paper Marks to Photo Credits
The first watermarks were in paper: a design formed in the sheet while it was made, visible when the paper is held up to the light. They appeared in Italy in the late 13th century, with the oldest known examples dating from around 1282, and papermakers used them to mark their mills and their grades of paper. Banknotes still use them, because a mark inside the paper is hard to fake.
A visible watermark on a photo does the same job of saying where a picture came from. Removing it can carry legal weight too: in the United States, 17 U.S.C. § 1202 forbids knowingly removing copyright management information, such as the author’s name or a copyright notice, to hide an infringement. Invisible marks, hidden in the pixel data instead of drawn on top, are a different technique; see the Steganography Tool.
About This Tool
This tool places a text watermark in one of nine positions or tiles it across the picture at any angle and spacing, with size and margin set as a share of the shorter side, any colour and opacity, and an optional outline. Show Work gives the text size, position, spacing, the share of the picture covered, and one pixel of the blend checked against the saved result. Settings can be put in the page address, for example ?pos=tile&opacity=25.
Images are decoded and saved in your browser by the engine behind the Universal Image Converter, so TIFF, PSD, HEIC, TGA and RAW files work too. Nothing is uploaded.
Related tools: Image Text Overlay, Steganography Tool, and Photo Privacy Cleaner.
Frequently Asked Questions
Corner mark or tiled?
A small corner mark is tidy and easy to read, but it is also easy to crop off or paint out. A tiled mark covers the whole picture, so removing it means repainting most of the image. Use a corner credit for photos you are happy to share, and a tiled mark for proofs and previews you do not want reused.
Why is the size a percentage instead of pixels?
So the mark looks the same on every picture. A 36 px mark is 3.3% of a 1080 px phone picture but only 0.9% of a 6000 × 4000 camera photo, where it almost disappears. At 5% of the shorter side, the phone picture gets 54 px text and the camera photo 200 px.
What opacity should I use?
Each pixel of the mark is blended as o + (c − o) × opacity, so at 40% the picture still contributes 60% of every covered pixel. Around 30 to 50% reads clearly without hiding the photo; 15 to 25% suits a subtle tiled pattern; 70% or more suits stamps such as DRAFT that must not be missed.
Does a watermark stop people copying my photo?
It discourages casual reuse and shows who made the picture, but it is not a lock: a corner mark can be cropped and editing tools can paint marks out. A tiled mark is much harder to remove cleanly. Post smaller copies, keep your full-size originals private, and keep the unmarked original safe.
Is my photo uploaded?
No. The picture is decoded, marked and saved entirely in your browser; nothing is sent to a server. The mark is drawn at the full size of your picture when you save, so it stays sharp.
How do I use the Watermark?
Just type your numbers. The answer shows up right away — there is no button to press. Change anything and it updates by itself.
Do I need to install or sign up for anything?
Not at all — it runs in the browser with nothing to install and no account. After it loads once, it even works without an internet connection.
Is my information private?
Yes. Everything happens in your browser. Nothing you type is sent to a server or saved anywhere.
Common Use Cases
Photographer’s credit
“© 2026 Jane Doe” at 4% of the shorter side and 70% opacity in the bottom-right corner of every shared photo.
Client proofs
A tiled “PROOF” at 25% opacity over a gallery of previews, so clients can choose pictures but not use them before paying.
Draft documents and designs
A large red “DRAFT” across a mockup or scanned page before it goes round for comments.
Listing and stock photos
A subtle tiled web address at 15% opacity on product or property photos that tend to be copied to other sites.
Last updated: