Audio Converter
Convert audio between 23 formats in your browser: WAV and MP3 instantly, plus FLAC, ALAC, AIFF, WavPack, TTA, CAF, AU, VOC, Wave64, MLP, AAC, Ogg Vorbis, Opus, AC-3, E-AC-3, WMA, MP2, DTS, SBC and Dolby TrueHD through an on-demand engine. Trim, change the sample rate or channels, adjust the gain or normalise on the way. Nothing is uploaded.
How to Use
- Drop an audio file or click to browse: MP3, M4A/AAC, Ogg, Opus, FLAC, WAV, WebM and most others. The format, length, sample rate and channels appear once it is read.
- Choose the output. WAV (16 or 24-bit) and MP3 are built in and instant; the other 20 formats use a conversion engine of about 32 MB that downloads once.
- For lossy formats pick a bitrate; optionally choose a sample rate, mono or stereo, a start and end time in seconds, a gain in decibels, or Normalize.
- Press Convert. Files your browser cannot play itself still convert through the engine, which reads the raw bytes.
- Download the result and compare its size with the original in the boxes underneath. Nothing is uploaded.
Audio Converter
Drop an audio file or click to browse
MP3, M4A/AAC, OGG, Opus, FLAC, WAV, WebM — everything stays in your browser
Worked Example
A 3-minute song, WAV to MP3. As 16-bit stereo WAV at 44,100 Hz it is 44 + 180 × 44,100 × 2 channels × 2 bytes = 31,752,044 bytes. As MP3 at 192 kbps it is about 192,000 × 180 ÷ 8 = 4,320,000 bytes, 13.6% of the WAV. The MP3 is made of ⌈7,938,000 ÷ 1,152⌉ = 6,891 frames of about 627 bytes each, because every MPEG-1 Layer III frame holds 1,152 samples per channel.
Lossless, trimming and gain. FLAC keeps every sample but packs them by prediction, so the saving depends on the sound: a 2-second pure 440 Hz test tone shrank from 352,844 bytes as WAV to 32,924 bytes as FLAC, 9.3%, while real music shrinks far less. Trimming 0:30 to 1:00 at 44,100 Hz keeps 30 × 44,100 = 1,323,000 samples per channel, and a gain of +6 dB multiplies every sample by 10^(6/20) = 2.0.
The common mistake: converting “up” to a higher bitrate. Turning a 128 kbps MP3 into a 320 kbps MP3 makes a 3-minute file grow from 2.88 MB to 7.2 MB, 2.5 times bigger, but it cannot bring back what the first encoder removed; it is a second lossy encode, so it is very slightly worse. Converting it to WAV or FLAC stops further loss but does not restore any either. Start from the best source you have.
Show Work
Formulas
Lossless, Lossy and the Codecs Behind Them
WAV, AIFF, AU, CAF and Wave64 are containers for plain PCM: a header and then the samples, which is why their size can be worked out exactly. Lossless codecs such as FLAC, ALAC, WavPack, TTA, MLP and TrueHD predict each sample from the ones before and store only the error, so decoding gives back the same numbers; FLAC was published as an IETF standard, RFC 9639, in December 2024.
Lossy codecs drop detail the ear is least likely to miss. MP3 is MPEG-1 Audio Layer III, standardised as ISO/IEC 11172-3 in 1993; AAC, used in .m4a files and most video, is ISO/IEC 13818-7 from 1997; Opus was standardised as RFC 6716 in September 2012 and Vorbis is Xiph.Org’s format inside .ogg files. AC-3, E-AC-3 and DTS are surround formats from film and home cinema, WMA is Microsoft’s, MP2 is the older MPEG-1 Layer II used in broadcasting, and SBC is the basic Bluetooth audio codec.
About This Tool
This tool converts audio between 23 formats and can trim, resample, change channels, adjust gain or normalise in the same step. WAV and MP3 come out instantly from the browser’s own decoder and a JavaScript MP3 encoder; every other format goes through a WebAssembly build of ffmpeg, which also reads files the browser cannot play, such as AC-3 surround.
Everything runs on your device and nothing is uploaded, so private recordings stay private. The engine is about 32 MB and is downloaded only when you choose one of its formats, then cached.
It is for musicians, podcasters, video editors and anyone with a file in the wrong format for the device or site they need it on.
Related tools: Video to MP3 Converter & Audio Extractor, Audio Tag Viewer, and Audio Muter.
Frequently Asked Questions
Which formats can I convert to?
Built in: WAV 16-bit, WAV 24-bit and MP3. Through the engine, lossless: FLAC, ALAC (.m4a), AIFF, WavPack, TTA, CAF, AU, VOC, Wave64 and MLP; lossy or specialist: AAC (.m4a), Ogg Vorbis, Opus, AC-3, E-AC-3, WMA, MP2, DTS, SBC and Dolby TrueHD (.thd, lossless). That is 23 in all, each checked to produce a real file.
Will converting lose quality?
Converting to WAV or another lossless format keeps exactly the audio that was decoded. Converting to a lossy format such as MP3 or AAC throws some detail away, which is hard to hear at 192 kbps and above for most music. Converting a lossy file to lossless does not bring back what was lost, and lossy to lossy loses a little more each time.
What does Normalize do?
For WAV and MP3 it scales the audio so its highest peak reaches full scale, 0 dBFS: a file peaking at 0.25 is raised by 12.0 dB. For the engine formats it uses ffmpeg’s loudnorm filter, which aims at a loudness of −24 LUFS (EBU R128) with peaks no higher than −2 dB, so it can make a file quieter. loudnorm works at 192 kHz inside, so choose a sample rate such as 44,100 Hz as well, or the file keeps that rate and gets much bigger.
What do sample rate and bit depth mean?
The sample rate is how many measurements per second: 44,100 Hz for CD audio, 48,000 Hz for video. Bit depth is the precision of each one: 16-bit or 24-bit. Keep the source values unless something requires others; lowering the rate removes high frequencies, and raising it adds no detail.
Is my audio uploaded?
No. WAV and MP3 are made with the browser’s own decoder and a JavaScript MP3 encoder, and the other formats with a WebAssembly build of ffmpeg, all on your device. The whole file is held in memory while it converts, so very long files need a lot of RAM.
How do I use the Audio Converter?
Simply type or paste your value and read the result, which refreshes the instant you change something. There is nothing to submit and nothing to wait for.
Do I need to install or sign up for anything?
Not at all — it runs in the browser with nothing to install and no account. After it loads once, it even works without an internet connection.
Is my information private?
Yes. Everything happens in your browser. Nothing you type is sent to a server or saved anywhere.
Common Use Cases
MP3 for compatibility
Turn an Ogg, Opus or FLAC file into a 192 kbps MP3 that plays on any device: about 1.44 MB per minute.
WAV for editing
Decode a compressed file to 16-bit WAV for a video editor: 10.6 MB per stereo minute at 44.1 kHz.
Archive in lossless
Re-pack a WAV as FLAC or Apple Lossless: the same samples, usually in far fewer bytes.
Meet an upload spec
Force 44,100 Hz, mono and a 0:30 to 1:00 trim in one pass for a voice-over upload.
Last updated: